Clearance

Limited Quantities


Signal Transformers On Sale

Signal 220V input BL 1752 *

Primary 230V Secondary 48VCT 7A & 28VCT 3A
or Primary 115V Secondary 24VCT & 14VCT

regular $12.50

Now $7.95

*Putting 115Vac into this 220V transformer will give you half the voltage at the same current

Also


Infinity Bass Wave/ Bass 2 8 ohm 100Watt amp. This unit was originally designed for a JBL speaker system that has since been discontinued. The Bass Wave features 100 watts of power @ 8 ohms. A 125hz electronic low pass filter is built in. The units handles powering on and off via a signal sensing circuit. Switchable high and low level inputs make it easy to match the Bass wave to any receiver or preamp. There is a two wire 120VAC line attached and these mono amps.  $60.00ea

See http://www.diysubwoofers.org/projects/basswmod.htm for details.



1 lot..... Amp board with 2 heat sinks using a STK 4031 power chip no transformer Roland amp board larger using a STK4122 II power chip no transformer No name sub amp using Tip 33C, Tip 34C, Tip 112 and Tip 117with transformer Smaller Roland amp board using a STK 4122 II power chip no transformer Total for the lot $37.50


11 ea Smaller Roland amp board using the STK4122 II Chip no trans $10.00ea




[ Home | Axial Capacitors | Radial Capacitors | Wire | Amps | Speaker | Components | Props | |Misc | New | Order]


 

steve.apexjr@prodigy.net